SPANK SWITCH<\/h2>\n\n\n\n

The SPANK switch is simply a jumper that goes between the Neck and the Bridge pickup. When the connection is made it puts the Neck and Bridge pickups in Parallel (similar to what happens in position 2 and 4 on 5 position switch strats.<\/p>\n\n\n\n

The beauty of this baby is that it requires the LEAST amount of mods and can be done to any strat easily.<\/p>\n\n\n\n

There are 2 ways to do the switch<\/strong><\/p>\n\n\n\n

• Push Pull (much more complicated because you have to remove wires and rewire)<\/li>
• Microswitch (just requires a switch and a 2 wires)<\/li><\/ul>\n\n\n\n

  WIRING TOOLS<\/strong><\/h2>\n\n\n\n

  At minimum you’ll need a few tools to get the job done. <\/p>\n\n\n\n

  • Solder Gun – A pencil style, preferably medium wattage.<\/li>
  • Rosin Core Solder (thin kind is best)<\/li>
  • Small wire clippers<\/li>
  • Wire (Stranded 22 gauge or solid 24 gauge)<\/li><\/ul>\n\n\n\n

    If you install a switch you’ll need a drill.<\/p>\n\n\n\n

    <\/p>\n\n\n\n

    <\/p>\n","protected":false},"excerpt":{"rendered":"

    SPANK SWITCH The SPANK switch is simply a jumper that goes between the Neck and the Bridge pickup. When the connection is made it puts the Neck and Bridge pickups in Parallel (similar to what happens in position 2 and 4 on 5 position switch strats. The beauty of this baby is that it requires…
    Read more<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-873","post","type-post","status-publish","format-standard","hentry","category-wiring"],"yoast_head":"\n